شركة الحديد المتكاملة » اقسام

12/09/2019

Introduction - Uni Strut C Channel Support System

ISP -Support Systems ISP - Integrated Steel Plant Cable Tray Support System produces various kinds of support systems in accordance with BS 6946:1988. The application of such Support Systems produced by ISP Industries is focused mainly towards carrying the load of the entire range of ISP Cable Management Systems i.e. Cable Trays, Wire Baskets, Cable Ladders and Cable Trunking with the most time and cost effective methods of installation. The complete range of Uni-Strut Channels, Cantilever Arms, Base posts Electra are made in Hot Dip Galvanized finishes in accordance to BS EN ISO 1461: 1999, Pre-Galvanized in accordance to BS EN 10147 and Stainless Steel as per BS EN 10088-2 1995. These supports can also be provided in various finishes such Powder and Epoxy coated..

Materials :

ISP metal framing channel manufactured from:

Hot rolled steel S 235 JR as per EN 10025 / ASTM A-1011 CS Type B (formerly ASTM A569 or ASTM A570)
Cold rolled steel DC01 as per EN 10130 / ASTM A1008 CS Type B (formerly ASTM A-366) and then: Hot- dip galvanized as per BS EN 1461 (formerly BS 729) / ASTM A123 or Electro plated as per EN 12329 / ASTM B633 (Electro deposited coatings of zinc on iron and steel)
Pre-galvanized steel DX51 D+Z as per EN 10346 (G180 and G275 is available upon special request) which supersedes EN 10327 which is a replacement of EN 10142 which in turn supersedes BS 2989 / ASTM A653M zinc coated (hot-dip galvanized) iron and steel CS (commercial) or SS (structural) quality G60 and G90 is available upon special request (formerly ASTM A527M) / ASTM A924 (coating) (formerly A525)
Stainless steel 1.4301 as per EN 10088-2 (formerly BS 1449 Part 2 / ASTM A240M, Grade AISI 304)

Applications :

Metal Framing / Electrical Applications
Pipe & Conduit Supports
Tunnel Pipe Stanchions
Beam Attachments
Pipe Risers

Channels :

Cable management support channel is cold formed on modern rolling machines from low carbon steel manufactured.

Lengths :

Standard length: 3000 mm with ± 3.2 mm length tolerance.
Custom lengths are available upon request.

Finishes :

Standard Finishes: Pre-Galvanized finish (ASTM A653M coating G90 and G60). Hot Dip Galvanized after fabrication (ASTM A123 or BSEN ISO1461:2009). Other custom coatings are available upon request

Product Detail :-

Uni Strut C Channel
Uni Strut C Channel Combinations
C Channel Cantilever
Flat Plat Fittings
Angle Fittings
U Shape & Z Shape Fittings
Wing Shape Fittings
Base Plate
Brackets & Brace Fittings
Pipe Conduit Clamps (Rigid Clamp , Channel Clamp , Pipe Clamp )
Channel Nut & Springs

نظام الربط

12/09/2019

معلومات عامة عن نظام حوامل الكابلات
مخطط طلب حوامل الكابلات
دليل طلب حوامل الكابلات
تركيب حوامل الكابلات
اكسسوارات حوامل الكابلات

سلم الكابلات

12/09/2019

معلومات عامة عن نظام حوامل الكابلات
مخطط طلب حوامل الكابلات
دليل طلب حوامل الكابلات
تركيب حوامل الكابلات
اكسسوارات حوامل الكابلات

شبكة الأسلاك سلة الكابلات صينية

12/09/2019

Wire Mesh Basket Cable Trays - General Features

With ISP Wire Mesh Basket Cable Trays, cable outputs downward, to right or left between the wires can be easily made thanks to the cage structure of Wire Mesh Tray systems. They are produced as stainless steel or Electro-galvanized plating options. Our wire mesh cable trays are manufactured in consideration of today''s high tech cabling requirements. High resistant stainless steel wire or Electro galvanized coating wires are manufactured. Wire mesh cable trays are widely utilized both in food production industry prioritizing hygiene and in data cables and low-voltage installations. Thanks to its lightweight and flexible structure, it provides superiority in curved crossings while ensuring convenience and facilitation in steering cables due to its open upper design. Extensive joint spacing and bracket and clamp alternative and options are available.

● Description:

Wire Mesh Cable Tray and Wire Basket cable trays offer double the cable support area to better support data communication and fiber optic cabling in addition to saving time and money in those lighter-duty cable support projects. Cable supports are manufactured according to common standards from high quality raw materials.

● Material:

Carbon Steel, SS304, SS316 & SS316L

● Surface Finish :

● Product feature:

(1)Thicken lid ,more durable and not easy be bent; (2)Safety warning symbols molded into lid surface, with universal safety colors for high visibility; (3)Easy carry hold design; (4)Work temperature from -25 degree to +50 degree; (5)High load capacity more than eight tons Wire Mesh Basket Cable Tray Product Detail ISP Product Detail of Wire Basket Cable Tray The following size sheet for your reference